How to iron a picture on a shirt without transfer paper

Sharing is caring!

Introduction

How to iron a picture on a shirt without transfer paper? Transfer paper simplifies the process of printing images on T-shirts, but there are other options to remember. One of the greatest uses a gel process, which functions similarly to transfer paper and produces impressive performance.

Get a container of glossy or matte gel medium and experiment with the infinite possibilities for DIY T-shirt printing without transfer paper. Any image that can be printed or photocopied can be converted to a T-shirt, so try with original works, paintings, text, and other images.

How to iron an image with no transfer paper?

1.Direct Printing on Fabric

Things you’ll need

  • Iron
  • Printer
  • Image
  • T-shirt
  • Scissors
  • Hard surface for iron your shirt.

Instructions

  • Select an image

You can choose any type of image. You will find a beautiful picture on the internet. So you can select your own photo, any text image, or your favorite movie starts picture, .so it’s up to you what kind of image you will choose. Make sure you print the image to match your shirt.

  • Cut the image

Cutting the image in the correct rec size. Cut as near the edge of your photograph as possible with a sharp pair of scissors. This helps you line up the photo perfectly on the shirt by removing some excess paper that you don’t need to iron.

  • Cover the picture with plastic wrap

Use newspaper or a plastic bag to protect the work surface. Paint a thin coat of gel medium over the image on the printed side using a paintbrush. Make sure that you have fully covered every aspect of the picture.

Place the photo gel side down on the T-shirt with attention. Try not to change the image. Place the bundled picture on the t-shirt. When it’s where you like it, cover it with paper towels.

  • Iron your shirt

Start ironing over the picture with the iron, which should be set to high. And sure to iron all the way around the corners so that the picture would not pill.

Instead of sliding the iron through the pattern, put it over each part, keeping it in place before raising and setting it again on the next.

  • Remove parchment paper

Start softly pulling off the parchment paper after you’ve ironed the whole picture. If you’re having trouble scraping the parchment paper, just lay it down immediately and iron over it again.

Allow cooling for 1-2 minutes before removing the parchment paper.

2. Use a Laser Printer

Things you’ll need

  • Gel medium
  • Paintbrush
  • Water spray bottle
  • Image
  • Scissors
  • Shirt

Instruction

  • Copy your image

Whether you have a laser printer or use a magazine file, you would need to copy your picture on a printer. Note that if you’re using an illustration of lettering or a logo, you must reverse it before applying it to your cloth. Remove any excess paper from around the picture.

  • Use the gel medium

Apply a generous layer of gel medium to the picture with the brush. Some methods coat both the cloth and the picture, but both methods produce satisfactory results.

Take care to ensure that the coating is smooth around the whole board. Leaving lumps increases drying time and results in ripples in the final frame.

  • Add your image

After applying the gel medium, gently flip the picture over and put it face down on your cloth. You may make small changes at this stage, so move the picture to the exact location you want.

When the angle is right, press gently and uniformly, starting in the middle and working outward. This eliminates bubbles and ensures that the gel medium is not lumpy. Most people use their fingers to do this, but you can use a lightweight silicone spatula if you choose.

You do not need to exert a lot of force. It just takes a light rubbing. Step aside until the portrait is in order and smoothed. For at least eight hours, the cloth and gel medium must dry and fix.

  • Water and rub your cloth.

When you have a whole dried cloth and medium, damp, wet the paper with a spray bottle set to mist or a wet sponge. You need the paper moist enough to wipe off your picture. This can take a few water applications. After removing all paper, let the fabric dry up entirely.

Adding another protective surface will increase the final image’s durability.

Note:

  • When DIY T-shirt printing without transfer paper, use a laser printer or photocopy the image to get the best results. It may be a modern picture, an image downloaded from the net.
  • You can do this project using an image/design from the internet if you do not have a scanner. If you decide to do so, skip to the point where your idea is written.
  • For painting on fabric you can use cotton fabric.The materials are more common with natural or light-colored fabrics. Fabric layers are well processed for washing and coloring the printed frame. Before you deal on them, your hands must be wiped properly.  It prevents imperfections created by soil and oil in the cloth.

Conclusion

Printing images onto T-shirts is a time-consuming process that helps you to create your own T-shirts. If the printing methods can seem difficult at first, they should become simpler after some experience.

Transfer printing is the best option for a one-time task. Screen printing necessitates more advanced equipment but helps you to print several shirts from a single file. But if you do not have a transfer paper or transfer paper is not available, you can try How to iron a picture on a shirt without transfer paper?

It’s a simple process, and you don’t have to waste too much time.

Sohel Rana is the founder, content crafter, and SEO's at Pic Editor Review. He has grown his passion over years about writing on software, how-to guide, and product description.

Leave a Comment

shares